Chevy does not have a do it yourself or on board programing ability on this model. Most hhr panel also comes with dual power sliding doors as well.

HELP Keyless Entry Remote 3 Button13716 Gmc trucks

So it’s worth a try i guess.

How to program a key fob chevy hhr. Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. You must do this within 30 seconds of removing the first key. 4.5 out of 5 stars.

The dealer would be the best place to get this done. It has to be hooked to a scanner to program the key fobs source(s): Instead of holding down lock & unlock for 15 seconds.

Program a new key fob for a 2002 chevy tahoe. Press and hold lock & unlock for 6 seconds, release both buttons and. So, an automotive locksmith is your only option to get a replacement key.

The chevrolet hhr came out in 2006 and comes standard with a remote keyless entry system as. It may not work for the hhr, but is sure did for my 2003 chevy silverado. After the engine has started, turn the key to off and remove the key.

Operate all functions on transmitters to verify correct system operation. Chevrolet hhr can also come with remote engine start control transmitter. Press and hold both the lock and unlock buttons on the remote until the doors lock and unlock.

Select the key fob desired to be programmed. Enter the vehicle and close the driver’s door. Turn the key off and your remote should be programmed.

Yes, once you have had the new key cut by a locksmith use the following instructions. Remove the existing key and within 5 seconds insert new key and turn it to the on position for 5 seconds. Insert the key into the ignition.

Turn ignition to the on position for 5 seconds, then back to off position. You will need a scan tool to program the key fob. Take the emergency key out of the remote and insert it into the bottom of the plastic cover, located at the bottom of the door lock cylinder on the driver side door lock.

My battery died for my remote/fob and after replacing the battery the fob did not open the doors. This includes the ss model. They come make keys and program ignition cylinders all the time for some of the other shops.

Press the set/reset button until remote key learning active is displayed. Follow the scan tool on screen instructions. If the vehicle does not accept the remote during your standard programming procedure, please try these steps.

These fobs must be programmed to your vehicle. On vehicles with memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. Detailed how to program chevrolet hhr remote instructions included with most fobs.

Start your engine ten seconds after inserting the key. Learn to program the remote to your chevrolet hhr without any help from the dealer. Too bad i wasn’t able to get it to work though.

This vehicle requires special equipment be connected to the vehicle to program the remote. Hhr keyless entry remotes are a very practical feature, offering lock, unlock and alarm as standard options. How do i program a new key fob into my chevrolet hhr.

32 years in the auto business Tap only the unlock button. I searched the web and found your thread and man i'm glad i did.

You will have to either tow the car to the dealer or have an automotive locksmith come and program the key on site. Insert an existing programmed working key into the ignition cylinder. For chevrolet hhr vehicles equipped with a transponder system and/or remote, intelligent key, or fob key, codes are available.

Turn the key on off on off on off on and leave in the on position. Insert working transponder key into ignition and turn to the ‘on’ position (just prior to cranking engine), wait 1 second and turn back to the off position to successfully enter programming mode. Insert your new key into the ignition and turn it to the on position.

Insert the original, already programmed key in the ignition and start the engine. You can see an example below. Even the programmer that came with the new key fob will not connect with the car.

Chevy hhr keyless remote programming instructions. Brand new genuine factory/oem gm keyless entry key fob remote for your 2006, 2007, 2008 chevrolet hhr. 2011 chevrolet hhr key programming.

Insert the key to be programmed and turn it to on within 10 seconds of removing the original key. If you have lost your original key fobs, or simply need replacment fobs, this is the part you need! I’m going to see if i can get a locksmith to come to my shop and do it during the day.